We have extensive design, manufacture and installation experience in the pipe mill industries. Our clients throughout North America have relied on us to redesign their pipe processing and pipe handling equipment.
We also have extensive experience in process flow design which creates efficiencies, increases productivity and decreases capital costs.
Our designs are proven to be rugged and reliable to withstand the harsh mill environment.
DynaIndustrial’s secondary pipe processing line has all the necessary functions; cut, grind, bevel and weld (I.D. and O.D.) to provide our clients with a quality finished product that increases productivity and decreases maintenance downtime.
DynaIndustrial was awarded a contract to supply a Rotary Plasma Cut-Off Unit to a large diameter pipe manufacturer. In this particular case the end user was positioning a manual cutting system on the pipe each time a pipe had to be cut. The process was difficult and time consuming.
DynaIndustrial supplied a standalone plasma unit that could easily be installed with minimal modifications to the existing pipe conveyor.
Prior to building this unit DynaIndustrial had supplied multiple units for a variety of applications in pipe making. The applications varied from in-process pipe parting to pipe test sampling to pipe reclaim. In some cases, units were supplied to eliminate problematic bandsaws or rotary carbide tip cut-off units.
Typically, each situation required customization due to available envelope constraints and or customer requirements. Units are designed with ease of operation and maintenance in mind. Typical specifications are outlined below but as stated, customization is common.
Technical Specifications—Plasma Units:
Pipe Cutting Ranges: 2” to 12” diameter, 8” to 24” diameter, 30” to 72”diameter
Pipe Thickness: .188 to .75 inch
Control: Local or Remote
Fume Containment: Optional
DynaIndustrial’s I.D. weld clamp/pipe endsizer was designed and manufactured to produce a more consistent product with minimal maintenance required.
The main benefit of our uncoiler is the ability to maintain control and back tension on the strip as it is being paid out. By maintaining back tension on the strip we eliminate lap to lap gauling or scratching. This can significantly reduce down grades and post processing of pipe, saving money and increasing prime yield.
Our uncoiler also eliminates coil spring when the bands are cut. By containing the coil while it is being threaded up to the butt weld we eliminate surface imperfections by controlling and preventing unwanted coil spring or unwinding.
Coil cars are an integral part of many pipe and steel making facilities. DynaIndustrial has experience with coil cars used in slitter lines, coil prep lines, spiral mills, ERW mills, cut to length lines and many others. Our designs focus on preventing damage to the coils and coil containment, being extremely robust and easy to maintain. We have dealt with many issues of surface scratching and lap to lap gouging and scratching. We will use this extensive experience to solve your coil car and coil handling problems.
DynaIndustrial has decades of experience with spiral mill and ERW hydrotesters. We have done a great deal of work to optimize the throughput of hydrotesters. From the handling equipment in and out of the hydro, to optimizing fill times and test times. We have done extensive work on making the equipment reliable and robust to ensure uptime and reliable testing.
Side guides are used in many steel processing facilities from cut to length lines, slitter lines, spiral mills, ERW mills, etc. Their primary function is to control the strip while other cutting, edge milling, forming or other processes are being done. DynaIndustrial’s side guides are extremely robust and easy to maintain. Any of the surfaces that come in contact with the scalp are easy to maintain. The side guides are available in various widths to suit your needs.
As with any piece of DynaIndustrial’s equipment it is designed to last in the extremely harsh environment of steel processing facilities.
DynaIndustrial’s edge miller clamp roll design eliminates clamp roll bearing failures. Along with an upgraded chip management system has proven to save time and money.
DynaIndustrial’s split yoke, high capacity forming rolls offer reduced bearing failures and efficient roll changes resulting in decreased maintenance costs.
DynaIndustrial has built weigh measure stations to provide final tally on outgoing pipe indicating weight, length and labelling with painted stencils, pin stamping, or color banding as required. This ensures accurate tracking of outgoing products. This system can be integrated with pipe tracking software.
We utilize a human machine interface (HMI) screen to allow for ease of operator interactions with the machine.
It also comes equipped with an integrated diagnostic interface.
Many pipe casings require testing to failure from external pressure. This can involve extreme pressures and forces to collapse pipe from external pressure. These tests require extremely highly engineered equipment to withstand the forces places upon them. DynaIndustrial has a range of vessel sizes and pressure ratings to achieve these tests; vessels up to 16’ long, 16” bore and up to 30,000 PSI.
Not only do we have these extreme pressures vessels but they have been redesigned for quickly loading and unloading test samples.
Our monitoring system records the pressure curve of when the pipe collapses and fails.
Pipe Size Range: 20” to 60: diameter, 20 to 40 feet length
Smooth Travel While Welding:
Features and Benefits:
With over 42 years of experience, an in-house team of engineers and state of the art manufacturing DynaIndustrial designs and manufactures turnkey-solutions to solve the pipe mills most challenging problems.